Integra DTR-70.2, Инструкция по эксплуатации

Страница: 63 / 124

63
En
Picture Adjust
Using “ Picture Adjust ”, you can adjust the picture qual-
ity and reduce any noise appearing on the screen.
To view the TV picture while setting, press
Enter . To
return to the previous screen, press Return .
■
Game Mode
`
Off :
Game Mode off.
`
On :
Game Mode on.
If video signal delay occurs during playback on a video
component (i.e. game console), select the corresponding
input source and set the “
Game Mode ” setting to “ On ”.
The delay will decrease but in return the picture quality
will become poor.
■
Wide Mode
*1*5
This setting determines the aspect ratio.
`
4:3 :
`
Full :
`
Zoom :
`
Wide Zoom :
`
Smart Zoom :
■
Picture Mode *1
`
Custom :
All settings can be performed manually.
`
ISF Day :
Setting when a room is bright.
`
ISF Night :
Setting when a room is dark.
`
Cinema :
Selected when the picture source is movie film, etc.
`
Game :
Selected when the picture source is game console.
`
Through :
Default values are adapted for all settings.
With “ Picture Mode ”, you can change the following set-
tings to be suitable for the movie or game screen by one
operation; “
Film Mode ”, “ Edge Enhancement ”, “ Mos-
quito NR ”, “ Random NR ”, “ Block NR ”, “ Resolution ”,
“ Brightness ”, “ Contrast ”, “ Hue ”, “ Saturation ”,
“ Gamma ”, “ Red Brightness ”, “ Red Contrast ”, “ Green
Brightness ”, “ Green Contrast ”, “ Blue Brightness ”,
“ Blue Contrast ”.
The receiver has been designed to incorporate setup and
calibration standards established by the Imaging Science
Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video
performance and has implemented a training program for
technicians and installers to use these standards to obtain
optimal picture quality from the receiver. Accordingly,
Onkyo recommends that setup and calibration be per-
formed by an ISF Certified installation technician.
■
Film Mode
*2*4*6
`
Auto :
Adjusts to the picture source, automatically selecting
“
Film Mode ”.
`
Video :
Selected when the picture source is video, etc.
`
Film :
Selected when the picture source is movie film, etc.
DVD-Video disc content originates from either film
(recorded at 24 frames per second) or video intended for
TV (recorded at 30 frames per second). With the default
“
Film Mode ” setting of “ Auto ”, the AV receiver automat-
ically detects the type of content and processes it accord-
ingly to achieve the best picture quality. If the AV receiver
detects the type of content incorrectly due to characteris-
tics of the disc, you can select “
Video ” or “ Film ” manu-
ally.
■
Edge Enhancement *2*4*7
`
Off:
Edge enhancement off.
`
Low:
Low edge enhancement.
`
Mid:
Medium edge enhancement.
`
High:
High edge enhancement.
With Edge Enhancement, you can make the picture appear
sharper.