Integra DTR-70.2, Инструкция по эксплуатации

Страница: 58 / 124

58
En
Input Channel
`
Left + Right :
Both the left and right channels are output.
`
Left :
Only the left channel is output.
`
Right :
Only the right channel is output.
Output Speaker
`
Center :
Mono audio is output by the center speaker.
`
Left / Right :
Mono audio is output by the front left and right
speakers.
This setting determines which speakers output mono
audio when the Mono listening mode is selected.
Note
• If the “ Center ” setting is set to “ None ” (
➔
55 ), this setting is
fixed at “ Left / Right ”.
Dolby
■
PLIIx Music (2ch Input)
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these
settings apply to Dolby Pro Logic II, not Dolby Pro
Logic IIx.
Panorama
`
On :
Panorama function on.
`
Off :
Panorama function off.
With this setting, you can broaden the width of the front
stereo image when using the Dolby Pro Logic IIx Music
listening mode.
Dimension
`
–3 to 0 to +3
With this setting, you can move the sound field forward
or backward when using the Dolby Pro Logic IIx Music
listening mode. Higher settings move the sound field
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much
surround sound, move the sound field forward to
improve the balance. Conversely, if the stereo image
feels like it’s in mono, or there’s not enough surround
sound, move it backward.
Center Width
`
0 to 3 to 7
With this setting, you can adjust the width of the sound
from the center speaker when using the Dolby Pro
Logic IIx Music listening mode. Normally, if you’re
using a center speaker, the center channel sound is out-
put by only the center speaker. (If you’re not using a
center speaker, the center channel sound will be distrib-
uted to the front left and right speakers to create a phan-
tom center). This setting controls the front left, right,
and center mix, allowing you to adjust the weight of the
center channel sound.
■
PLIIz Height Gain
The Height Gain Control in Dolby Pro Logic IIz
enables the listener to select how much gain is applied
to the front high speakers. There are three settings,
“
Low ”, “ Mid ” and “ High ”, and the front high speakers
are accentuated in that order. While “ Mid ” is the default
listening setting, the listener may adjust the Height Gain
Control to their personal preference.
`
Low :
Low PLIIz Height Gain becomes active.
`
Mid :
Medium PLIIz Height Gain becomes active.
`
High :
High PLIIz Height Gain becomes active.
Note
• If the “ Front High ” settings is set to “ None ” (
➔
55 ), this setting
cannot be selected.
■
Dolby EX
This setting determines how Dolby EX encoded signals
are handled. This setting is unavailable if no surround
back speakers are connected. This setting is effective
with Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only.
`
Auto :
If the source signal contains a Dolby EX flag, the
Dolby EX or THX Surround EX listening mode is
used.
`
Manual :
You can select any available listening mode.
Note
• If the “ Surround Back ” setting is set to “ None ” (
➔
55
), this
setting cannot be selected.
• If the “ Front High ” or “ Front Wide ” setting is enabled (
➔
55 ),
this setting is fixed at “ Manual ”.
■
Dolby Volume
`
Off :
Dolby Volume off.
`
On :
Dolby Volume on.
Dolby Volume automatically adjusts the difference in vol-
ume levels which can occur between different content or
source components, freeing the user from having to make
volume adjustments. Also, by adjusting the frequency bal-
ance according to the playback volume, it recreates the
original source audio. Dolby Volume therefore provides
comfortable listening, effectively controlling the volume
level difference without unnatural changes in volume or
sound quality to recreate the balance and nuance of the
source audio.
Note
• When the “ Dolby Volume ” setting is set to effective,
Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® will
be set to “ Off ” and “ Equalizer ” setting will be set to “ Off ” from
“ Audyssey ” or remain set to “ Manual ”.
• If you would like to use Dolby Volume in THX listening modes,
set “ Loudness Plus ” setting to “ Off ” and set “ Preserve THX
Settings ” setting to “ No ”.
• When the “ Dolby Volume ” is set to “ On ”, the Late Night func-
tion cannot be set.