TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
78
4.17.3
Motor Step
Lock masters can examine the bolt movement by moving the bolt of the
lock step by step in both directions with menu
Motor step
.
Note
If
‘
automatic closing
’
is set via optional PC software,
the system will close the lock one minute after the end
of the motor steps described here.
Without automatic closing, the bolt stays in the
position reached via the last motor step.
1.
Unlock the system by opening lock 1 or by opening all locks.
2.
With
>
, select
Service
and press key
Enter
.
Service | Reset
is on display.
3.
With
>
, select
Motor step
and press
Enter
again.
Service | Motor step
is on display.
4.
Confirm with
Enter
.
Code entry | Lock 01
is on display.
5.
With
>
, select the lock, if necessary, and press
Enter
.
Code entry
,
Master
,
0123456789
, as the case may be, and
Code:
are
on display.
6.
Enter the master code.
Motor step | <-= open | close =->
is on display.
7.
With
<
or
>
select
open
or
close
.
Please wait
is on display. The bolt drives in / out by one motor step and
stops.
Step OK
is on display.
8.
Repeat step 7 as often as you like, also in opposite direction.
You have successfully moved the lock bolt step by step.
