TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
69
4.15.4
Deregistering PIN Code for Users
The holder of the master code (lock master) can deregister PIN codes. With
option „
User groups | * = YES
selected, the CIT master can also do
so.
Caution
Danger of a configuration error: Opening the lock
might become impossible.
A lock at which too few codes are registered cannot
be opened. Especially in case you have selected the
option ‘Dual code’, make
sure that at least as many
codes as required are authorised and registered.
1.
Select menu
Settings | Master | PIN code
.
Detailed instructions see
„
Registering PIN Code for Users
“, steps 1
-7 on
page 67.
PIN code | Register
is on display.
2.
Select
PIN code | Deregister
with
>
and
Enter
.
Code entry
and, as the case may be,
Lock 1
is on display.
3.
Select the lock with and
>
and
Enter
, if required.
In CIT mode,
Code entry | User: Master
is on display.
With
>
, you can select CIT master and confirm with
Enter
.
Without CIT mode,
Code entry | Master
and
Code:
is on display.
See section „
Entering PIN Code
“ on page
41.
4.
Enter the (CIT) master code.
(CIT) master code | Please wait
and
Deregister | User 01
is on display.
5.
With numerical keys or with
<
and
>
and
Enter
select the user to be
deregistered.
PIN code | Please wait
and
User XX | Deleted
are on display, and, optionally,
Lock 2
and
Delete code?
and
*= YES *= NO
are on display with two
locks in the system.
6.
Select
*= YES
in case you want to delete the code also at lock 2.
Another code? | *= YES *= NO
is on display.
7.
Select
*= YES
in case you want to deregister another PIN code.
For every further deregistration repeat step 5 (and optionally step 6).
Select
*= No
in order to stop deregistering.
You have successfully deregistered PIN code.
