TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
71
4.15.6
Registering Code Cards (RFID Cards)
The lock master and, as the case may be, the CIT master, can register
code cards for themselves and for other users. In order to be able to use
the card to identify themselves, users must be authorised to do so.
Settings
For the user, the access right to use code cards,
‚
card
’
has been made available via user matrix.
Take
a RFID card.
1.
Unlock the system (open lock 1 or all locks).
2.
With key
>
select
Settings
and press
Enter
.
Settings | Manager
is on display.
3.
With key
>
select
Master
and press
Enter
.
Master | Lock 1
is on display.
4.
With
>
select the lock and press
Enter
.
Code entry
,
Master
,
0123456789
, as the case may be, and
Code:
are
on display.
See section „
Entering PIN Code
“ on page
41.
5.
Enter the master code.
Master | Change code
is on display.
6.
With
<
or
>
select
Code card
and
Enter
.
Code card | Register
is on display.
7.
Confirm
Register
with
Enter
.
Code entry
,
Master
and
Code:
are on display.
8.
Enter the master code.
Please wait
and
Register | User: Master
are on display.
9.
With the numeric keys or with
<
or
>
and
Enter
select the number of the
user for that you want to register a code card.
User: No. | Insert card
/
Reading data
is on display.
10. Hold the RFID card read in front of the reader.
See the instructions on page 42.
Reading data
and, with chip cards,
Remove card
are on display.
11. Remove the card.
User no. | Registered
is on display.
Copy code? | *= yes *=no
are on display with 2 locks in the system.
12. In order to copy the card to the other lock, simply select
*= yes
.
User no. | Registered
is on display. After that,
Another code? | *= YES *= NO
is on display. You can register further
cards. To do so, select
*= YES
and repeat the steps 9-11 with new user data.
You have successfully registered a code card.
