TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
47
4.12.6
Opening with Unlocking Delay and Release Time
This paragraph is a sequel of the last one.
Settings
See the last paragraph. Additionally, option
‘Release time’
is activated.
1.
Perform steps 1-5 of the last paragraph and be prepared to enter
code when indicated.
Code entry | Master
is on display. An acoustic signal
indicates the end of the unlocking delay. During the release time,
which follows, an acoustic signal sounds every two seconds.
2.
With > select the lock and press
Enter
, if required.
Code entry | User: Master
is on display.
3.
With
<
and
>
and
Enter
or with numeric keys select your user number.
4.
Enter your code.
See step 4 of the last paragraph. An acoustic signal sounds repeatedly.
Open | Lock open: 1
is on display.
You have successfully opened the lock.
4.12.7
Opening Locks with Parallel Code
The first user opens lock 1 and the second one opens lock 2.
All users open according to their authorisation.
Settings
Option ‘Parallel code’ (for systems with 2 lock
s
only) is activated via PC software. Boxes
PIN code
,
Release
,
Opening access
and, if necessary,
Disarm
of the user matrix have been marked for
you. The lock master has registered your PIN-Code
/ card at the lock.
1.
Open lock 1 according to your authorisation.
See the instructions on opening at the beginning of this chapter. Lock 1 opens.
Open | Lock open: 1
is on display.
2.
Another user carries out step 1 at lock 2.
Open | Please wait
is on display. The lock bolt retracts.
Open | Lock open: 2
is on display.
You have successfully opened the locks in your system.
