TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
43
4.12
Opening and Closing
Depending on the configuration of the lock system, users enter their user
–
or their
personnel number (
“
staffnb
”
) before entering code. Mostly, only one of these
options is described within the following sets of instructions.
Caution
If a burglar alarm system (BAS) is connected to the system,
users cannot open lock 1 unless they are authorised to
disarm the BAS.
In the user matrix of the PC software, tick [AE mark] the box
Disarm
for users, if a BAS is connected.
In order to unlock the system, open all locks or open lock 1 depending on the system
settings. Also see paragraph
‘
The System Status
’
.
Depending on the configuration, opening may require that two persons enter PIN
code.
4.12.1
Opening a Lock with PIN Code
Settings
Boxes
PIN code
,
Release
, (
1 of x)
,
Open locks
and, if
necessary,
Disarm
(user matrix) have been marked for
you. At the lock, PIN-Code has been registered for you.
1.
Press key
Clear
, release it immediately, and press key
>
, if
required, and key
Enter
in order to select
Open
.
Code entry | Lock 1
is on display, as it may be.
2.
With key
>
and key Enter select the lock, if required.
Code entry | Standard
is on display.
3.
Confirm
Standard
with key
Enter
.
Code entry | User: Master
is on display.
4.
With key
>
select user- or personnel number and confirm with
Enter
, if
required.
Code entry | user:
is on display or
Code entry |Staffnb: XXXXXX
.
User / Staffnb: | PIN Code
are on display.
5. Confirm with
Enter
.
User no / Staffnb: XXXXXX
is on display.,
0123456789
, as it may be,
and
Code:
.
The display indicates how to enter the code. See
„
Entering PIN
Code
“ on page
41.
Code entry | User: Master
is on display.
6.
Enter your PIN code.
Open| Please wait
is on display. The bolt of the lock moves back.
Open | Lock open: no.
is on display and, as it may be,
System
unlocked
.
You have successfully opened the lock.
