Indulogix ILVFE-1W0075, Руководство пользователя

Страница: 55 / 81

ILVFE-series
user manual
55
A433 [Start at powerup]
Enables/disables a feature that allows a Start or Run command to automatically cause the drive to
resume running at commanded speed after drive input power is restored. Requires a digital input
configured for run or start and a valid start contact.
Attention: Equipment damage and/or personal injury may result if this parameter is
used in an inappropriate application. Do not use this function without considering
applicable local, national and international codes, standards, regulations or industry
guidelines.
Options 0
"Disabled" (Default)
1 "Enabled"
A434 [Reverse disable]
Related parameter(s):d006
Enables/disables the function that allows the direction of motor rotation to be changed. The reverse
command may come from a digital command, the keypad or a serial command. All reverse inputs
including two-wire Run Reverse will be ignored with reverse disabled.
Options 0 "Rev enabled" (Default)
1 "Rev disabled"
A435 [Flying start en]
Sets the condition that allows the drive to reconnect to a spinning motor at actual RPM.
Options 0
"Disabled" (Default)
1 "Enabled"
A436 [Compensation]
Enables/disables correction options that may improve problems with motor instability
Options 0 "Disabled"
1 "Electrical" (Default)
Some drive/motor combinations have inherent instabilities
which are exhibited as non-sinusodial motor currents. This
setting attempts to correct this condition.
2 "Mechanical"
Some motor/load combinations have mechanical resonances
which can be excited by the drive current regulator. This
setting slows down the current regulator response and
attempts to correct this condition.
3 "Both"
Stop drive before changing this parameter
Stop drive before changing this parameter