Indulogix ILVFE-1W0075, Руководство пользователя

Страница: 52 / 81

52
ILVFE-series
user manual
A410 [Preset freq 0]
(1)
A411 [Preset freq 1]
A412 [Preset freq 2]
A413 [Preset freq 3]
Related Parameter(s): P108 , P109, P110, t201, t202, A401, A402
Provides a fixed frequency command value when t201 - t202 [Digital Inx Sel] is set to 4 “Preset
Frequencies”. An active preset input will override speed command.
(1)
To activate A410 [Preset Freq 0] set P108 [Speed Reference] to option 4 “Preset Freq 0-3”.
Values
A 410 Default: 0.0 Hz
A 411 Default: 5.0 Hz
A 412 Default: 10.0 Hz
A 413 Default: 20.0 Hz
Min/Max: 0.0/400.0 Hz
Display: 0.1 hz
State Digital in 1
(I/O terminal 05)
State Digital in 2
(I/O terminal 06)
Frequency source Accel/Decel parameter used
(2)
0 0 A410 [Preset freq 0] [Accel time 1] / [Decel time 1]
1 0 A411 [Preset freq 1] [Accel time 1] / [Decel time 1]
0 1 A412 [Preset freq 2] [Accel time 2] / [Decel time 2]
1 1 A413 [Preset freq 3] [Accel time 2] / [Decel time 2]
(2)
When a digital input is set to "Accel 2 & decel 2", and the input is active, that input overrides the
settings in this table.
A418 [Skip frequency]
Related Parameter(s): A419
Sets the frequency at which the drive will not operate. If set to 0 this parameter is disabled.
Values
Default: 0 Hz
Min/Max: 0.0/400 Hz
Display: 1 Hz
A419 [Skip frequency]
Related Parameter(s): A418
Determines the bandwidth around A418 [Skip Frequency]. A419 [Skip Freq Band] is applied above
and below the actual skip frequency. See the diagram below. If set to 0 this parameter is disabled.
Values Default: 0.0 Hz
Min/Max: 0.0/30.0 Hz
Display: 0.1 Hz