46
ILVFE-series
user manual
t221 [Relay out sel]
Related Parameter(s): P103, t222, A451
Sets the condition that changes the state of the output relay contacts.
Options
0
“Ready/Fault"
(default)
Relay changes state when power is applied. This indicates that the
drive is ready for operation. Relay returns drive to shelf state when
power is removed or a fault occurs.
1
“At frequency”
Drive reaches commanded frequency.
2
“Motor running”
Motor is receiving power from the drive.
3
“Reverse”
Drive is commanded to run in reverse direction.
4
“Motor overload" Motor overload condition exists.
5
"Ramp reg"
Ramp regulator is modifying the programmed accel/decel times to
avoid an overcurrent or overvoltage fault from occurring.
6
"Above freq"
Drive exceeds the frequency (Hz) value set in t222 [Relay out level].
7
"Above Cur"
Drive exceeds the current (% Amps) value set in t222 [Relay out
level].
Important:
Value for t222 [Relay out level] must be entered in
percent of drive rated output current.
8
"Above DC Volt"
Drive exceeds the DC bus voltage value set in t222 [Relay out
level].
9
"Retries exst"
Value set in A451 [Auto Rstrt Tries] is exceeded.
10
"Above anlg V"
Analog input voltage (I/O Terminal 13) exceeds the value set in
t222 [Relay out level].
This parameter setting can also be used to indicate a PTC trip point
when the input (I/O Terminal 13) is wired to a PTC and external
resistor.
Use t222 to set threshold.
11
"Paramcontrol"
Enables the output to be controlled over network communications
by writing to t222 [Relay out level]. (0=Off, 1=On.)
12
"Nonrec fault"
Value set in A451 [Auto rstrt tries] is exceeded.
A451 [Auto rstrt tries] is not enabled.
A non-resettable fault has occurred.
13
"I/O control"
Enables the output to be controlled by bit 6 of the logic command
word. See Writing (06) Logic Command Data in appendix C for
more information.
14 - 22
Reserved
Содержание ILVFE-1W0075
