IFM Ecomat 300 AC1355, Дополнительное руководство по устройству

Страница: 156 / 248

The DPV1 command channel
Syntax
11-2
In the DPV1 address space a command channel with a length of 19 words is defined for each AS-i
master. A DPV1 master operates as host system.
DPV1 addresses
Start End
dec hex dec
Contents
Access
r = read
w = write
Size [Words]
4794 12BA 4812 master 1 command channel request r / w 19
4813 12CD 4831 master 1 command channel response r 19
8890 22BA 8908 master 2 command channel request r / w 19
8909 22CD 8927 master 2 command channel response r 19
The commands are always triggered by the DPV1 master by means of a corresponding entry in its
output data area. The controllere responds then in the input data area of the host system.
11.2 Syntax
Request of DPV1 master
Bit
Word
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1
user ID command request
2
reserved for string transfers command number
3...18
command data
19
0
NOTE
If a command is to be executed, the value 65
hex
must be entered in the command request. Changing
the command number does not start the execution. If a command is to be executed several times, the
user ID must be changed accordingly, e.g. by counting up. Before starting a command it should be
verified in the command status whether the previous command has been completed.
Response from controllere (DPV1 slave)
Bit
Word
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1
reflected user ID command status
2
reserved for string transfers reflected command number
3...18
command data
19
0