IFM Ecomat 300 AC1355, Дополнительное руководство по устройству

Страница: 183 / 248

The DPV1 command channel
DPV1 command 31dec (1Fhex):
one-time execution of the "Extended safety monitor protocol" in the "Safety at Work" monitor
11-29
Description of the different fields:
Word no. 4:
LEDs OSSD 1 LEDs OSSD 2
15 14 13 12 11 10 9 8
Description
0 0 0 0 0 0 0 0 green: contacts of the output circuits closed
0 0 0 1 0 0 0 1 yellow: startup / restart disable active
0 0 1 0 0 0 1 0
yellow flashing or
red: contacts of the output circuits open
0 0 1 1 0 0 1 1
red flashing: error on the level of the monitored AS-i
components
0 1 x x 0 1 x x
reserved
(x = any value)
data call 1 data call 0
7 6 5 4 3 2 1 0
Description
0 0 0 0 0 0 0 0
protective operation; everything OK
(output circuits which are not available, not configured or
dependent are indicated as OK)
0 0 0 1 0 0 0 1 protective operation, output circuit 1 off
0 0 1 0 0 0 1 0 protective operation, output circuit 2 off
0 0 1 1 0 0 1 1 protective operation, both output circuits off
0 1 0 0 0 1 0 0 configuration operation: power on
0 1 0 1 0 1 0 1 configuration operation
0 1 1 0 0 1 1 0 not reserved / not defined
0 1 1 1 0 1 1 1
configuration operation: fatal device error, RESET or
replacement of devices required
no current diagnosis information available, please wait
Word no. 5:
OSSD2 not green OSSD1 not green
15…12 11 10...8 7…4 3 2...0
Description
reserved 0 0 reserved 0 0
no module - responses of the data calls in the words 6..17 are
not relevant
reserved 0 1...6 reserved 0 1...6 number of modules which are not green
reserved 0 7 reserved 0 7 more than 6 modules are not green
Word no. 6...17:
1st to 6th module address output circuit 1/2:
Indicates the index of the module of the configuration. The module address which was defined in the
program ASIMON is indicated.