IFM Ecomat 300 AC1355, Дополнительное руководство по устройству

Страница: 103 / 248

DP module 12: Extended command channel
Module 12, extended command 21dec (15hex):
read ID character string of an AS-i slave with the profile 7.4
9-27
Response from controllere (gateway) in case of an error
Bit
Word
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1
E=1 B=0
M
0/1
reflected user ID reflected command number = 15
hex
2
reserved = 0 reserved = 0
3
0 error code
4…18
ignored
Legend → page 9-3
Example:
Word no. Value [hex] Description
1
8
215
E=1: error during command execution
M=0: AS-i master 1
x2 = reflected user ID 2
15 = reflected command number 21
2 0000 reserved
3 0014
error code 14
hex
= master in wrong operating mode
here: master is not in the normal mode
Possible error codes
Value [hex] Description
0C faulty S-7.4 protocol sequence
0D S-7.4 protocol aborted (timeout)
0E invalid AS-i slave address for the S-7.4 protocol (e.g. B slaves)
0F AS-i slave has completed the S-7.4 string
10 AS-i S-7.4 no longer connected (no longer in LAS)
11 another S-7.4 transfer to the addressed AS-i slave is already active
12 the previous segmented S-7.4 transfer was not completed
13 invalid S-7.4 data length
14 invalid S-7.4 command