IFM Ecomat 300 AC1355, Дополнительное руководство по устройству

Страница: 26 / 248

Set-up
Connect the controllere to the Profibus host
7-2
Fieldbus Address
0
O
O
K
K
87
▲ ▼
E
E
S
S
C
C
4.
► Scroll to the requested address with [ ▲ ] / [ ▼ ].
Fieldbus Address
32
O O K K
87
▲ ▼
E E S S C C
5.
► Save the fieldbus address with [OK].
Fieldbus Baudrate
#### KBaud
O
O
K
K
88
▲ ▼
E
E
S
S
C
C
6.
> If there is communication with the fieldbus master:
display of negotiated baud rate
► Acknowledge with [OK].
> If there is no communication with the fieldbus master:
display value not defined
► Cancel with [ESC].
7.2 Connect the controllere to the Profibus host
► Connect the Profibus cable to the controllere.
7.3 Parameter setting of the Profibus host
NOTE
Refer to the description of the Profibus interface on the host
(host = fieldbus master = in most cases higher-level PLC)
GSD file
(GSD =
G
eneral
S
tation
D
escription) The GSD file
ifm604D8.gsd
on the
ifm
CD contains different
possible definitions (indications of lengths) for each of the 12 modules, adapted to the controllere.
→
Hardware catalogue of the Profibus configuration software in the gateway folder.
► Copy this file to the suitable directory of the corresponding fieldbus configuration program (
→
its
description).