IBM xSeries 236 8841, Руководство пользователя

Страница: 49 / 210

d. Position the heat sink over the microprocessor and slide one of the tabs on
the heat sink into the slot under the retainer spring.
Retainer spring
Microprocessor
Heat sink
Heat-sink locking
lever
e. Push the heat sink into position firmly; then, let it rest on the microprocessor.
f. Close the heat-sink locking lever to secure the heat sink to the
microprocessor.
7. If you have other options to install or remove, do so now.
8. Replace the air-baffle assembly and cover. Go to “Completing the installation”
on page 45.
Replacing a microprocessor and heat sink
This section provides instructions for replacing a microprocessor and heat sink.
Complete the following steps to replace a microprocessor and heat sink:
1. Read the safety information beginning on page v and “Installation guidelines” on
page 11.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables. Remove the cover and air-baffle assembly.
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling these devices,
see “Handling static-sensitive devices” on page 12.
Chapter 3. Installing options
39