IBM xSeries 236 8841, Руководство пользователя

Страница: 70 / 210

10. Remove the panel, carefully threading the cable past the other components
and through the opening in the chassis.
Note: If the cable has been secured in the cable clamps, gently pull it out of
the clamps before pulling the cable through the opening in the chassis.
To install the operator information panel, reverse the previous steps.
Notes:
1. Thread the cable through the opening in the chassis and extend it into the
server before attaching the operator information panel.
2. Secure the cable in the cable clamps along the inside of the chassis.
3. Fit the left tab (in the rack configuration, this is the top tab) into the lip on the
chassis, and then press on the right tab (in the rack configuration, this is the
bottom tab) until it snaps into place.
60
xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide