IBM xSeries 236 8841, Руководство пользователя

Страница: 119 / 210

Note: See “System replaceable units” on page 144 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
161
(Real time clock battery error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Clear CMOS. See “Erasing a lost or forgotten password (clearing
CMOS memory)” on page 99.
4. System board.
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163
(Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Clear CMOS. See “Erasing a lost or forgotten password (clearing
CMOS memory)” on page 99.
4. System board.
164
(Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
175
(Hardware error)
v
System board
176
(Computer cover or cable cover was
removed without a key being used)
1. Run the Configuration/Setup Utility program.
2. System board.
177, 178
(Security hardware error)
1. Run the Configuration/Setup Utility program.
2. System board.
184
(Power-on password damaged)
1. Run the Configuration/Setup Utility program.
2. Clear CMOS. See “Erasing a lost or forgotten password (clearing
CMOS memory)” on page 99.
3. System board.
185
(Drive startup sequence information
corrupted)
1. Run the Configuration/Setup Utility program.
2. System board.
186
(Security hardware control logic failed)
1. Run the Configuration/Setup Utility program.
2. System board.
187
(VPD serial number not set.)
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
188
(Bad EEPROM CRC #2)
1. Run the Configuration/Setup Utility program.
2. System board.
189
(An attempt was made to access the
server with invalid passwords)
v Run the Configuration/Setup Utility program, and type the
administrator password.
196, 198, 199
(Microprocessor mismatch)
1. Verify microprocessors are of same type and speed.
2. Microprocessor.
Chapter 6. Symptom-to-FRU index
109