IBM System x3300 M4, Инструкция по установке и обслуживанию

Страница: 97 / 470

If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 104.
Installing an adapter
The following notes describe the types of adapters that the server supports and
other information that you must consider when you install an adapter:
v
To confirm that the server supports the adapter that you are installing, see
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.
v
Locate the documentation that comes with the adapter and follow those
instructions in addition to the instructions in this section.
v
Do not set the maximum digital video adapter resolution above 1280 x 1024 at
75 Hz for an LCD monitor. This is the highest resolution that is supported for
any add-on video adapter that you install in the server.
v
Avoid touching the components and gold-edge connectors on the adapter.
v Any high-definition video-out connector or stereo connector on any add-on
video adapter is not supported.
v
The server uses a rotational interrupt technique to configure PCI adapters so
that you can install PCI adapters that do not support sharing of PCI interrupts.
v
The server provides two PCI riser slots on the system board. The riser cards
provide up to three PCI Express Gen2 adapter slots. The following table lists the
Chapter 2. Installing optional devices
79