IBM PC Server 330, Руководство пользователя

Страница: 280 / 382

Ethernet Controller Messages
PCNTNW-DOS-14 This version of LSL is not supported.
Explanation: The PCNTNW MLID cannot run successfully using this version of the
LSL.
Action: Update your LSL.COM to a newer version.
PCNTNW-DOS-15 The frame type is already activated for frame
<
string
>
. The
NET.CFG entry has been ignored.
Explanation: Two FRAME keywords under the same main section heading specified
the same frame type. A specified frame type can be specified only once per driver.
Action: Remove the duplicate FRAME keyword entry.
PCNTNW-DOS-16 The node address was incorrectly specified in NET.CFG.
Explanation: You used the NODE ADDRESS option in the NET.CFG file to
override the node address on the network board. The number specified was not a
valid Ethernet address. An Ethernet address is six bytes in length. This error occurs
if Bit 0 of the first address byte is a 1. This bit must always be 0. For example, if the
first byte has the following address, an invalid Ethernet address is generated.
FIRST BYTE
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 1
This byte will produce node addresses in the 0100 0000 0000 to 01FF FFFF FFFF range
(in hexadecimal), all of which will be invalid.
Action: Specify a valid node address in the NET.CFG file.
PCNTNW-DOS-17 An invalid keyword was specified in NET.CFG on line
xx.
Explanation: The keyword specified in the NET.CFG file is incorrect.
Action: Check the keyword in question. Make sure that the keyword is correctly
spelled.
PCNTNW-DOS-18 The frame type specified in the NET.CFG file is not supported.
Explanation: The NET.CFG file specified the PROTOCOL option for a PCNTNW
MLID. The specified frame type is not supported by the PCNTNW MLID.
Action: Check the PROTOCOL line in the NET.CFG file for possible omissions of
required dashes and underscores, or any misspellings. Check the PCNTNW MLID
documentation for supported frame types.
266
PC Server 330 User's Handbook