IBM PC Server 330, Руководство пользователя

Страница: 20 / 382

Controls and Indicators
CD-ROM Eject Button: Push this button to release the CD
from the CD-ROM drive.
Power-On Light: This green LED lights when you turn on
your server by pressing the power switch, and when the
server powers on in the Unattended mode.
Power Switch: Use this switch to turn your server on
manually, or return the server to Standby mode. The
automatic restart feature, which enables the server to restart
following a momentary power loss, means that the server is
never completely turned off. Do not set the server to the
Standby mode if any of the drive In-Use lights are on. This
might damage the information stored on a hard disk or
diskette.
You can configure the server to start at a specified date and
time, or when it receives a signal from either serial port. (For
more information on setting Unattended startup, see
“Alarm/Wakeup Settings” on page 96.)
To toggle the server:
Ÿ To the Attended mode from the Standby mode, press and
release the power switch.
Ÿ Attended mode to the Standby mode, press the power
switch in slowly just until the power-on light goes out,
and then immediately release the switch.
Diskette-Drive In-Use Light: This light comes on when the
drive is accessing a diskette.
Diskette Eject Button: Push this button to release a diskette
from the drive.
CD-ROM Drive In-Use Light: This light comes on when the
CD-ROM drive is accessed.
6
PC Server 330 User's Handbook