IBM PC Server 330, Руководство пользователя

Страница: 257 / 382

About the Test Programs
Test Options
Each option that appears on the Options Menu is briefly described
below.
Ÿ Halt on Error : The default is No. If you select Yes, you can
resume testing after a halt by pressing any key. If you select
No
, any error detected is logged (only if you enabled the Test
Log) and the program continues testing without halting.
Ÿ
Beep on Error : The default is No. If you select Yes, a beep
sounds whenever the test program detects an error.
Ÿ
Lap Count : You can set the number of times to run each group
of tests. The default setting is 1. You can enter a number from
0 to 10. The looping is controlled on a block basis, not on an
individual test basis. Therefore, if you select tests A, B, and C
and the Lap Count is set to 3, the test sequence is
ABC/ABC/ABC.
Ÿ Pause Control : You can have the test programs pause between
test modules and wait for you to press any key to continue.
Also, you can have the test program wait for a user response to
indicate if the video tests pass. The default setting is Pause
Between
. The available choices are Pause Between and No
Pause . If you choose No Pause, the test programs continue
testing without a pause from one video test to the next, and
from one test module to the next.
Ÿ Test Log : You can select whether or not to do logging. You
can select one of the following five choices:
– No Logging
– COM1
– LPT1
– ASCII
– .DBF
No Logging is the only selection that turns off Test Log. The
other four selections enable Test Logging.
Chapter 5. Solving Problems
243