IBM PC Server 330, Руководство пользователя

Страница: 68 / 382

9. When the synchronization process completes, insert a blank
3.5-inch formatted diskette in the primary diskette drive and
select Advanced Functions from the Main Menu; then, select
Backup config. to diskette
. Follow the instructions on the
screen.
10. Exit the ServeRAID configuration program by pressing Esc or
selecting Exit from the Main Menu. A Confirm pop-up window
appears asking you to confirm your action.
11. Reinstall your operating system and device drivers, then restore
your data and programs.
Maintaining Your Disk Arrays
This section contains procedures for defining the state of a hard disk
drive, information about the status indicators for logical and hard
disk drives, and instructions for replacing defunct drives. It also
contains procedures for displaying drive information and erasing
the device error table. This section provides information about the
status indicators for logical and hard disk drives, and the results of
a hard disk drive failure. It also contains procedures for defining
the state of a hard disk drive and replacing defunct drives.
Setting Device States
To define the state of a physical hard disk drive attached to the
ServeRAID adapter, you can use the Administration and Monitoring
program or the ServeRAID configuration program. By using the
Administration and Monitoring program from your active operating
system Desktop, you do not have to restart the server. Refer to the
README file for instructions on using the Administration and
Monitoring program for your operating system.
To define the state of a drive:
1. Start the ServeRAID configuration program (refer to “Starting
the Configuration Program” on page 25).
2. Select Rebuild/Device Management from the Main Menu. The
following screen appears.
54
PC Server 330 User's Handbook