IBM PC Server 330, Руководство пользователя

Страница: 93 / 382

Display/Change the ServeRAID Adapter Parameters
The Display/Change Adapter Parameter menu allows you to view
and change the ServeRAID adapter parameters.
To display or change the adapter parameters:
1. Start the ServeRAID configuration program (refer to “Starting
the Configuration Program” on page 25).
2. Select Advanced Functions from the Main Menu.
3. Select Display/Change Adapter Params and press Enter. The
following screen appears.
Bay Bay
Array Array
Ch 2 Ch 1
Bay
Array
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Ch 1 Ch 2 Ch 3
A
A
ONL
ONL
B
B
C
C
DDD
A
A
ONL
ONL
B
B
C
C
A
ONL
B
ONL ONL
ONL ONL
ONL
ONL
ONL
ONL
ONL
ONL
A
ONL
RDY
C
C
TAP
SHS
HSP
DHS
B
RBL
Display/Change Adapter Parameter
Set BIOS Compatability Mapping
1. Help
2. Display Adapter Status
3. Change Adapter Host/SCSI ID
4. Set BIOS Compatability Mapping
5. Set Channel => Bank Mapping
6. Exit
1. Extended BIOS Mapping (8GB)
2. Limited BIOS Mapping (2GB)
Select option for which to set BIOS compatability bit.
IBM PC ServeRAID Adapter Disk Array Configuration Ver. 1.XX
Adapter Number: 1 Bus Number: 0 Host ID = Null Config
Ÿ Display/Adapter Status allows you to view the status of the
adapter.
Ÿ Change Adapter Host/SCSI ID allows you to change the
adapter SCSI ID and the SCSI transfer rate. You can change
the default setting from 10 MHz to a maximum of 20 MHz,
if you have SCSI-3 Ultra Fast/Wide drives (Ultra SCSI). If
the transfer rate is set to 20 MHz with Ultra SCSI drives, the
SCSI bus in the ServeRAID adapter can provide up to 40
MB per second data rate. You can also define the host
configuration ID as any 12 characters. In addition, you can
change the number of drives in a group that will startup
Chapter 2. Configuring Your Disk Arrays
79