IBM PC Server 330, Руководство пользователя

Страница: 310 / 382

Troubleshooting Other Network Adapters
Note: If you cannot find the problem in the troubleshooting charts,
go to “About the Test Programs” on page 233 to test the
system. If you already have run the test program, or if
running the test does not reveal the problem, have the system
serviced.
Software Problem Action
Is your software
program OK? To determine if problems are caused by the software,
verify that:
1. Your system has the minimum memory
requirements needed to use the software. Refer to
the information that comes with the software to
verify memory requirements.
Note: If you have just installed an adapter or
memory, you might have a memory address
conflict.
2. The software is designed to operate on your
system.
3. Other software works on your system.
4. The software you are using works on another
system.
If you received any error messages when using the
software program, refer to the information supplied
with the software for a description of the messages and
solutions to the problem.
If the items above are correct and the problem remains,
contact your place of purchase or service technician for
help.
Troubleshooting Other Network Adapters
This section provides general troubleshooting information for
problems that might occur when a network adapter is installed in
the server. For more specific details about troubleshooting your
network adapter, see your network-adapter documentation.
If the network adapter cannot connect to the network, or if the
network adapter contains LEDs that do not work, check the
following:
Ÿ Make sure that:
296
PC Server 330 User's Handbook