IBM PC Server 330, Руководство пользователя

Страница: 120 / 382

EISA Configuration Diskette
3. View or edit details: After adding EISA or ISA adapters in Step
2, use the Edit selection of this step to configure them. Use the
Edit Resources
selection of this step for complex configurations.
If you change a setting in this step, you might have to change a
switch or jumper setting on the system board or on a device.
Note: You can view the settings for PCI devices, but you cannot
change them through the EISA Configuration utility
program. To change settings for PCI devices, see “PCI
Bus Control” on page 102.
4. Examine switches or print report: After Steps 1 and 2 have
been completed correctly, this step displays the correct switch
and jumper settings for the installed devices that have switches
and jumpers. Also, you can choose to print a system
configuration report.
5. Save and exit: This step allows you to save your configuration
or to discard the changes before you exit from the program.
Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to highlight your
selection; then press Enter to make your selection. To help you
track your progress, a checkmark (
√
) appears on the main menu
next to the completed steps.
You can access help information through:
Ÿ Help windows, which remain active.
Ÿ
Information windows, which appear automatically as a result of
some configuration activities.
Ÿ
The
Help=F1
prompt, which allows you to access the Help Menu
for screens displaying the prompt. To remove the Help Menu,
press Esc.
Recording EISA Configuration Settings
Record the configuration settings you made in Step 3, View or edit
details
and Step 4, Examine switches or print report on a separate
sheet and store it in a safe place for future reference. If you have a
printer attached to your server, you can use the Print Screen key to
print these settings. The settings are helpful when you install
additional options, or if you need to have your system serviced.
106
PC Server 330 User's Handbook