IBM PC Server 330, Руководство пользователя

Страница: 157 / 382

Working with Memory-Module Kits
Installing Memory-Module Kits
Before you begin
Ÿ Read “Electrical Safety” on page 124 and “Handling
Static-Sensitive Devices” on page 125.
Ÿ
Turn off the server.
Ÿ
Disconnect all external cables and power cords, and then
remove the server cover (see “Preparing to Add Options” on
page 126).
To install a dual inline memory module (DIMM):
1. Locate the memory connectors on the processor board.
J2 J3
J4 J5
Notes:
a. Each connector slot contains two keys (dividers), which are
used to assure that a memory-module kit can be installed
only in the correct position.
b. A retaining clip at each end of the connector locks the
memory-module kit in place.
2. Press the retaining clips at the ends of the connector outward, to
the open position.
Chapter 4. Installing Options
143