IBM PC Server 330, Руководство пользователя

Страница: 215 / 382

Installing Internal Drives
2. Locate the termination jumper. Refer to the documentation that
comes with your CD-ROM for the location of the jumper.
3. Remove any termination jumper from the CD-ROM.
4. Go to “Installing Hard Disk Drives (Non-Hot-Swap Servers)” on
page 175 and reinstall the CD-ROM drive. (The procedure for
installing CD-ROM drives is the same as the procedure for
installing hard disk drives in non-disk-array models without the
hot-swap bay option.)
Where to go next?
Ÿ
Installing memory-module kits? — Go to “Installing
Memory-Module Kits” on page 143.
Ÿ Removing memory-module kits? — Go to “Working with
Memory-Module Kits” on page 142.
Ÿ
Installing an adapter? — Go to “Installing Adapters” on
page 135.
Ÿ Removing an adapter? — Go to “Removing Adapters” on
page 139.
Ÿ Removing an diskette drive? — Go to “Removing Diskette
Drives” on page 170.
Ÿ
Removing a hard disk drive? — Go to “Removing Hard Disk
Drives (Non-Hot-Swap Servers)” on page 190 or “Removing
Hard Disk Drives (Hot-Swap Servers)” on page 195.
Ÿ Installing hard disk drives? — Go to “Installing Hard Disk
Drives (Non-Hot-Swap Servers)” on page 175.
Ÿ
Installing a microprocessor? — Go to “Working with
Microprocessor Upgrades” on page 202.
Ÿ Installing a security feature? — Go to “Adding Security
Options” on page 215.
Ÿ No internal devices to install or remove? — Go to
“Completing the Installation” on page 218.
Ÿ
Installing an external option? — Go to “Connecting External
Options” on page 222.
Chapter 4. Installing Options
201