IBM PC Server 330, Руководство пользователя

Страница: 278 / 382

Ethernet Controller Messages
PCNTW-DOS-3 Could not find PCNTNW MLID to unload.
Explanation: A request was made to unload PCNTNW MLID, but the MLID is not
loaded.
Action: None.
PCNTW-DOS-4 A TSR is loaded above the PCNTNW MLID.
Explanation: You tried to unload the PCNTNW MLID from memory, but the
PCNTNW MLID detected another Terminate and Stay Resident (TSR) program
loaded above the MLID. For the PCNTNW MLID to unload safely, you must first
unload any TSR programs that were loaded after you loaded the MLID.
Action: Either unload the other TSR program before loading the PCNTNW MLID,
or unload the TSR program before attempting this operation.
PCNTW-DOS-5 PCNTNW MLID could not be unloaded; the operation was
aborted.
Explanation: The PCNTNW MLID attempted to remove the resident PCNTNW
MLID from memory, and failed. A hardware error has probably occurred.
Action: Run the Ethernet diagnostic.
PCNTW-DOS-6 The adapter did not initialize. PCNTNW did not unload.
Explanation: The hardware did not initialize correctly. The PCNTNW driver did
not load.
Action:
Check the hardware. Make sure that the board's hardware setting matches
its settings in the NET.CFG file.
PCNTW-DOS-7 You need another PCNTNW MLID Section Heading in the
NET.CFG file in order to load the MLID again.
Explanation: You tried to load the PCNTNW MLID a second time. Normally, you
would do this so that you could use two or more Ethernet controllers in the server.
When two or more of the same type of Ethernet controllers are installed in the server,
an associated PCNTNW MLID section heading must be specified in the NET.CFG
file.
Action: Create a NET.CFG file and add the commands for both PCNTNW MLID
boards to the file. Then, restart the server.
264
PC Server 330 User's Handbook