IBM IntelliStation E Pro, Руководство по техническому обслуживанию аппаратной части

Страница: 49 / 182

Event ID Type Description
19 Informational Explanation: Team nn . Preferred primary adapter took over.
Action: None.
20 Informational Explanation: Team nn . Preferred secondary adapter took over.
Action: None.
21 Warning Explanation: Team nn . Primary adapter does not sense any probes.
Possible reason: partitioned Team.
Action: Make sure the cables of the adapter team are connected to the
same LAN segment. Reconfigure the team if necessary.
Replacing the battery
When replacing the battery, you must replace it with a lithium battery of the same
type from the same manufacturer. To avoid possible danger, read and follow the
information in “Safety information” on page 129.
To order replacement batteries, call 1-800-772-2227 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,
call your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure the system and reset the
system date and time.
Complete the following steps to replace the battery:
1. Follow any special handling and installation instructions supplied with the
replacement battery.
2. Turn off the computer and all attached devices. Disconnect all external cables
and power cords; then remove the computer cover.
3. Complete the following steps to remove the battery:
a. Use one fingernail to press the top of the battery clip away from the battery.
The battery pops up when released.
b. Use your thumb and index finger to lift the battery from the socket.
4. Complete the following steps to insert the new battery:
a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
b. Press the battery down into the socket until it clicks into place. Make sure
the battery clip holds the battery securely.
Diagnostics
39