IBM IntelliStation E Pro Скачать руководство пользователя страница 47

Страница: 47 / 182

Error code (hex)

Description

0x0F

Explanation:

Could not allocate enough memory for other structures.

For Windows NT:

Action:

1. From the Windows NT desktop, click

Start Æ Control Panel Æ Networks Æ Adapters

2. Select an IBM Ethernet adapter from the list.

3. Click

Properties Æ Advanced

4. Lower the resource values that apply to the transmit queue.

For Windows 2000:

Action:

1. From the Windows 2000 desktop, click

Start Æ Settings Æ Control Panel Æ Network and

Dial-up Connections

2. Right-click an IBM Ethernet adapter in the list and click

Properties

3. Select a component and click

Configure

4. Click the

Advanced

tab and lower the resource values that apply to the transmit queue.

0x10

Explanation:

Did not find any Ethernet controllers.

Action:

Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.

0x11

Explanation:

Multiple Ethernet controllers found, but none matched the required ID.

Action:

Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.

0x13

Explanation:

Did not find any Ethernet controllers that matched the required subven/subdev.

Action:

Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.

0x16

Explanation:

Single adapter found, but multiple instances tried to load.

Action:

Using the Configuration/Setup Utility program, make sure that Ethernet is enabled, and

that the integrated 10/100 Ethernet controller or the optional Ethernet PCI adapter are enabled.

0x17

Explanation:

Slot parameter not specified in the registry.

Action:

Remove the adapter driver and reinstall it.

All other
4-character
hexadecimal
codes

Action:

See supplementary documentation, such as www.ibm.com/pc/support, for more

information.

Ethernet Windows NDIS teaming messages

This section explains the messages associated with Ethernet teaming.

Event ID

Type

Description

Error

Explanation:

Team name and physical adapter name are the same. This

is an invalid configuration.

Action:

Reconfigure the adapter team by double-clicking the

PROSet

icon in the Control Panel.

Error

Explanation:

Unable to allocate required resources.

Action:

Free some memory resources and restart.

Diagnostics

Содержание IntelliStation E Pro























































































































































































Результаты поиска

Содержание IntelliStation E Pro

Отзывы:

Похожие инструкции для IntelliStation E Pro

Бренды по названию

Популярные бренды

IBM IntelliStation E Pro, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание IntelliStation E Pro

Отзывы:

Похожие инструкции для IntelliStation E Pro

Бренды по названию

Популярные бренды