IBM IntelliStation E Pro Скачать руководство пользователя страница 110

Страница: 110 / 182

CD-ROM drive problems

Symptom

FRU/action

CD-ROM drive is not
recognized.

Verify that:

The IDE channel to which the CD-ROM drive is attached (primary or

secondary) is enabled in the Configuration/Setup Utility program.

All cables and jumpers are installed correctly.

The correct device driver is installed for the CD-ROM drive.

2. Run CD-ROM drive diagnostics.

3. CD-ROM drive.

CD is not working properly.

Clean the CD.

2. Run CD-ROM drive diagnostics.

3. CD-ROM drive.

CD-ROM drive tray is not
working. (The computer must be
turned on.)

Insert the end of a straightened paper clip into the manual tray-release
opening.

2. Run CD-ROM drive diagnostics.

3. CD-ROM drive.

Diskette drive problems

Symptom

FRU/action

Diskette drive activity LED stays
on, or the system bypasses the
diskette drive.

If there is a diskette in the drive, verify that:

The diskette drive is enabled in the Configuration/Setup utility program.

The diskette is good and not damaged. (Try another diskette if you have
one.)

The diskette is inserted correctly in the drive.

The diskette contains the necessary files to start the computer.

The software program is working properly.

The cable is installed correctly (in the proper orientation).

2. To prevent diskette drive read/write errors, be sure the distance between

monitors and diskette drives is at least 76 mm (3 in.).

3. Run diskette drive diagnostics.

4. Cable.

5. Diskette drive.

6. System board.

Expansion enclosure problems

Symptom

FRU/action

The SCSI expansion enclosure
used to work but does not work
now.

Verify that:

The cables for all external SCSI options are connected correctly.

The last option in each SCSI chain, or the end of the SCSI cable, is
terminated correctly.

Any external SCSI option is turned on. You must turn on an external SCSI
option before turning on the computer.

2. For more information, see your SCSI expansion enclosure documentation.

100

IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual

Содержание IntelliStation E Pro























































































































































































Результаты поиска

Содержание IntelliStation E Pro

Отзывы:

Похожие инструкции для IntelliStation E Pro

Бренды по названию

Популярные бренды

IBM IntelliStation E Pro, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание IntelliStation E Pro

Отзывы:

Похожие инструкции для IntelliStation E Pro

Бренды по названию

Популярные бренды