IBM IntelliStation E Pro, Руководство по техническому обслуживанию аппаратной части

Страница: 99 / 182

Note: It might be necessary to use the tip of a screwdriver to disengage the
lower tab.
Release
latch
Retainer slots
5. Push inward on the two left tabs of the operator information panel until it pops
free of the chassis; then, remove it from the computer, making sure that the
cable follows freely.
To install the operator information panel, reverse the previous steps.
Speaker and bracket
Note: Read “Before you begin” on page 41 and “Safety information” on page 129.
Complete the following steps to remove the speaker and bracket:
1. Turn off the computer and attached devices; then, disconnect all external cables
and power cords.
2. Remove the cover (see “Removing the cover of the 6226” on page 60).
3. Rotate the diskette drive cage up.
FRU information (service only)
89