IBM IntelliStation E Pro, Руководство по техническому обслуживанию аппаратной части

Страница: 123 / 182

SCSI error codes
Error code FRU/action
All SCSI Errors One or more of the
following might be causing the problem:
v A failing SCSI device (adapter, drive,
controller)
v An improper SCSI configuration or SCSI
termination jumper setting
v
Duplicate SCSI IDs in the same SCSI
chain
v A missing or improperly installed SCSI
terminator
v
A defective SCSI terminator
v An improperly installed cable
v A defective cable
1. Make sure that external SCSI devices are turned on before
you turn on the computer.
2. Make sure that the cables for all external SCSI devices are
connected correctly.
3. If you have attached an external SCSI device to the computer,
make sure the external SCSI termination is set to automatic.
4. Make sure that the last device in each SCSI chain is terminated
correctly.
5. Make sure that the SCSI devices are configured correctly.
Temperature error messages
Message Action
DASD Over Temperature (level-critical;
direct access storage device bay x was
over temperature)
v
Ensure that the system is being properly cooled ; see “System
reliability considerations” on page 41.
DASD Over recommended Temperature
(sensor
x ) (level-warning; DASD bay x had
over temperature condition)
v
Ensure that the system is being properly cooled ; see “System
reliability considerations” on page 41.
DASD under recommended temperature
(sensor
x ) (level-warning; direct access
storage device bay x had under
temperature condition)
v Ambient temperature must be within normal operating
specifications
; see “Features and specifications” on page 4.
DASD Over Temperature (level-critical;
sensor for DASD1 reported temperature
over recommended range)
v
Ensure system is being properly cooled ; see “System reliability
considerations” on page 41.
Power supply x Temperature Fault
(level-critical; power supply x had over
temperature condition)
1. Ensure system is being properly cooled; see “System reliability
considerations” on page 41.
2. Replace power supply x
System board is over recommended
temperature
(level-warning; system board
is over recommended temperature)
1. Ensure system is being properly cooled ; see “System reliability
considerations” on page 41.
2. Replace the system board.
System board is under recommended
temperature
(level-warning; system board
is under recommended temperature)
v Ambient temperature must be within normal operating
specifications
; see “Features and specifications” on page 4.
System over temperature for CPU x
(level-warning; CPU x reporting over
temperature condition)
v Ensure system is being properly cooled; see “System reliability
considerations” on page 41.
System under recommended CPU x
temperature (level-warning; system
reporting under temperature condition for
CPU x)
v Ambient temperature must be within normal operating
specifications
; see “Features and specifications” on page 4.
Symptom-to-FRU index
113