IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 176 / 317

140
1. xSeries 335 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options
section.
2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section. If non-IBM racks are to be
used, assure that both front and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed servers. A
clearance of 51 to 64mm (2 to 2.5in) must be maintained between the front door and the system unit's front bezel. The rear door must
maintain the same or greater clearance.
3. Refer to the Rack Console Options section for information regarding console connectivity using these options.
4. A C2T Interconnect Cable ChainTechnology Cable Kit (P/N 06P4792) may be used for the attachment of console devices to one or
multiple chained xSeries 335s. The kit contains a 2m (6.5ft) breakout cable for attachment to a keyboard, mouse and monitor as well as
a 2m (6.5ft) chaining cable for connecting two xSeries 335s together when the standard 260mm (10in) chaining cable is not long
enough. A maximum of 42 xSeries 335s are supported in a single chain. No more than one Cable Chain Technology Cable Kit may be
used. If the last server in the chain is connected to a console switch rather than directly to a monitor, a console cable (P/N 09N4293 or
94G7447) is required in addition to the cable kit. System management interconnect network functionality is transmitted between x335
systems through the C2T Interconnect cable.
5. xSeries 335 supports rack configurations only and ships without a keyboard or mouse.
6. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat
Panel Monitor Console Kit (P/N 32P1032, 32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
7. Advanced TrackPoint IV features are not available on IBM xSeries systems.
8. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.
9. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY console switches.
xSeries 335 Tape Options
Part
Number Tape Drives
Bays
Supported
1
SCSI
Interface
(bit)
Form
Factor
Termination
Included
Ext Tape
Enclosures
1
00N7991
20/40 GB DDS/4 4mm Internal Tape
Drive
- 16 Ultra2 LVD
89mm
(3.5in) HH
or 133mm
(5.25in) HH
Y
2
3551001
3
00N7990 40/80GB DLT Internal SCSI Tape Drive - 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
00N8015
110/220GB Super DLT Internal SCSI Tape
Drive
- 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
24P2396 100/200GB LTO Half-High Tape Drive
7
- 16 Ultra2 LVD
133mm
(5.25in) HH
Y
2
3551001
3
24P2398
40/80GB Half-High DLTVS Internal SCSI
Tape Drive
- 16 Ultra2 LVD
133mm
(5.25in) HH
Y
2
3551001
3
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader - 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
External Tape Enclosures
0034B0X NetBAY Tape Enclosure (Rack Mount)
4
- 16 Ultra2 LVD 4U Rack N -
3551001 NetMEDIA Storage Expansion Unit EL
5
- 16 LVD Rack Y -
3503B1X Full-High SCSI Tape Enclosure
6
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
1. xSeries 335 does not support internal tape drives and does not include an external SCSI connector. An external tape library or internal tape drive with a tape enclosure,
supported SCSI adapter and appropriate cable must be selected. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which
has an external 0.8mm VHDCI connector. Select tape drive, enclosure and supported adapter then use Appendix D: Cables - Storage Units - Controllers to select an
appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option. When installed in a NetMEDIA Storage Expansion Unit,
termination is also provided by the standard cables shipped with the enclosure.
3. LVD support for LVD tape drives installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) is provided by two four-drop internal LVD cables.
4. This 4U rack-mounted enclosure supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external connectors for attachment of up to
six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides termination for the SCSI
bus. A single 300w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage Units -
Controllers to select a supported cable.
5. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, rack-mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 0.8mm VHDCI connectors and two internal four-drop LVD terminated 16-bit SCSI cables for device attachment. Two power
supplies and two power cords are also included. External storage cables are not included.
6. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack
(allow additional 1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external cable.
Supports the following full-high tape options: 00N8015, 00N8016, 00N7992, 00N7990.
7. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes