IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 85 / 317

65
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
Updated 12/03/02
IB
M
xS
eri
e
s
22
0
xSeries 220 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
1
Slots
Supported
1, 2
Storage Controllers
3
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller
4
Full 64-bit (1, 2, 3, 5)
5
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller
6
Half 64-bit 1 ... 5
19K4646 PCI Wide Ultra160 SCSI Adapter
7
Half 32-bit 1 ... 5
02K3454 PCI Fast/Wide Ultra SCSI Adapter
8
Half 32-bit 1 ... 5
Networking
9
Ethernet
10
09N9901 10/100 EtherLink Server Adapter by 3Com
11
Half 32-bit 1 ... 5
06P3601 10/100 Ethernet Server Adapter
11
Half 32-bit 1 ... 5
22P4901 10/100 Dual Port Server Adapter
11
Half 64-bit 1 ... 5
22P6801
PRO/1000XT Server Adapter by Intel (copper) w/CD,
manuals
11
Half 64-bit 1 ... 5
22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1 ... 5
31P6301 NetXtreme 1000 T Ethernet Adapter (copper)
11
Half 64-bit 1 ... 5
Token Ring
34L5001 16/4 Token-Ring PCI Management Adapter
11
Half 32-bit 1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter
11
Half 32-bit 1 ... 5
Communications
12
33L4618 V.90 PCI Data/Fax Modem Half 32-bit 1 ... 5
37L14xx Serial I/O SST 8- and 16-port adapters
13
Half 32-bit 1 ... 5
System Management
09N7585 Remote Supervisor Adapter
14
Half 32-bit 2
1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot. 133MHz PCI-X adapters are
backward compatible with 33/66MHz, 64-bit PCI-based servers.
2. The xSeries 220 has five full-length, 33MHz PCI expansion slots, three 64-bit and two 32-bit.
3. xSeries 220 has an integrated Ultra160 SCSI Controller with a single internal channel. Nonhot-swap models ship with a five-drop, multi-mode terminated LVD SCSI cable. Hot-swap
models ship with a two-drop nonterminated LVD SCSI cable.
4. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connections are 0.8mm VHDCI.
5. Because the onboard SCSI controller connector is located in-line with slot four, a full-length adapter does not seat properly in slot four if a cable is attached to that connector. If a cable
is not attached to that connector, the full-length adapter can be installed in slot four. The interference is created by the battery pack on the ServeRAID-4Mx controller.
6. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one
external Ultra160 connection. External connector is 0.8mm VHDCI.
7. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. Only one of the two connectors may be utilized.
8. PCI Fast/Wide Ultra SCSI Adapter (P/N 02K3454) provides one external 68-pin high density connector that supports external SCSI devices such as tape enclosures. The adapter
includes 8- and 16-bit internal SCSI connectors. Only one connector can be used at a time. A 16-bit terminated UltraSCSI internal cable is included.
9. The xSeries 220 includes an integrated Intel copper-based full-duplex, 10/100Mbps Ethernet controller.
10. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant
solutions provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible.Three optional Ethernet adapters are copper and
Intel-based (P/N 06P3601, 22P4901, 22P6801). Two are Broadcom-based (P/N 22P7801, 31P6301).
11. The Wake on LAN feature of this adapter is supported only in slot one.
12. xSeries 220 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A software compatible) and one high-speed parallel port supporting devices using SSP/EPP/
ECP protocols adhering to the IEEE 1284 Standard.
13. See Appendix E for details on Serial I/O Options and configuration limitations.
14. Connect the 20-pin ribbon cable provided with the option between the planar connector and the adapter. Install the external AC power supply. Do not use the system management
adapter to power down the system.
S
lo
t
4
-
3
3
M
H
z
,
6
4
-b
it, 5
v
S
lo
t
5
-
3
3
M
H
z
,
6
4
-b
it, 5
v
Al
l
S
lo
ts-
F
u
ll
L
e
n
g
th
S
lo
t 1
-
3
3
M
H
z, 3
2
-b
it,
5
v
S
lo
t
2
-
3
3
M
H
z
,
3
2
-b
it, 5
v
S
lo
t
3
-
3
3
M
H
z
,
6
4
-b
it, 5
v
External Connector Access