IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам, Страница: 172 / 317

136
EIDE Configurations
EIDE models include a standard CD-ROM drive attached to one connector of the IDE controller using a single-drop IDE cable and the standard IDE HDD is attached
to the other IDE connector using a standard two-drop IDE cable. One additional IDE HDD may be installed in the one available HDD bay, attaching to the second
drop of the standard two-drop IDE cable.
SCSI Configurations
xSeries 335 hot-swap SCSI models support two hot-swap SCSI HDDs on a DASD backplane. The backplane is connected to the integrated Ultra320 single-channel
controller through a 16-bit nonterminated SCSI cable. Attachment of external SCSI devices require a supported optional SCSI PCI controller. The standard CD-ROM
is attached to the IDE connector using a single-drop IDE cable.
RAID configurations are supported by the integrated LSI chipset, which provides onboard mirroring. Optional ServeRAID-4Lx or -4Mx controllers can be installed to
support the internal HDDs, in which case the standard cable would be used to attach the backplane to the RAID controller.
For additional information regarding internal cabling, refer to Appendix F: Internal Cabling Overview.
xSeries 335 Internal SCSI Cabling
xSeries 335 Hard Disk Drive (HDD)
SCSI Models
Total
Internal
Storage
1
10,000rpm SCSI HDDs 15,000rpm SCSI HDDs
18.2GB
(06P5754)
36.4GB
(06P5755)
73.4GB
(06P5756)
18.2GB
(06P5767)
36.4GB
(06P5768,
06P5776)
0GB Standard in base models
18.2GB 1 - - 1 -
36.4GB 2 1 - 2 1
72.8GB - 2 - - 2
73.4GB - - 1 - -
146.8GB
max
- - 2 - -
This table does not represent all possible HDD configurations. Total internal storage listed is /- 0.2GB unless otherwise noted.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice.
EIDE Models
Total
Internal
Storage
1
7200rpm EIDE HDDs
40GB
(P/N 22P7157)
60GB
(P/N 09N4207)
80GB
(P/N 09N4226)
120GB
(P/N 09N4231)
40GB Std in IDE models - - -
80GB 1 - - -
100GB - 1 - -
120GB - - 1 -
140GB
2
- 1 1 -
160GB - - - 1
180GB
2
- 1 - 1
200GB
2
- - 1 1
240GB
2
- - - 2
1. Select a total storage row then add the HDDs from all columns to the standard HDD.
2. Requires replacing the standard HDD.