IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 164 / 317

130
Part Number Description
Rack and NetBAY
1, 2
Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported
devices.
Console Connectivity
3
06P4792 C2T Interconnect Cable Chain Technology Cable Kit
4
1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
32P1637 C2T Conversion Option
09N4290 NetBAY 1x4 Console Switch
09N4291 NetBAY 2x8 Console Switch
Keyboard and Mouse
5
28L3644 Space Saver II Keyboard
6, 7
10K3849 106-key Preferred USB Keyboard with 2-port USB Hub (stealth black)
8, 9
28L3673 Sleek 2-button Stealth Black Mouse
33L3244 Sleek USB Mouse (stealth black)
9
1. xSeries 330 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options
section.
2. Note limitations and restrictions for adequate cooling in the Rack Cabinets and Options section. If non-IBM racks are to be used,
assure that both the front and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed servers. A
clearance of 51 to 64mm (2 to 2.5in) must be maintained between the front door and the system unit’s front bezel. The rear door must
maintain the same or greater clearance.
3. Refer to the Rack Console Options section for information regarding console connectivity using these options.
4. A C2T Interconnect™ Cable Chaining Technology Cable Kit (P/N 06P4792) is required for the attachment of console devices to one
or multiple chained xSeries 330s. The kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard. mouse and monitor as well
as a 2M (6.5ft) chaining cable for connecting two xSeries 330s together when the standard 260mm (10in) chaining cable is not long
enough. A maximum of 42 xSeries 330s are supported in a single chain. No more than one Cable Chain Technology Cable Kit may be
used. If the last server in the chain is connected to a console switch rather than directly to a monitor, a console cable
(P/N 09N4293 or 94G7447) is required in addition to the cable kit.
5. xSeries 330 supports rack configurations only and ships without a keyboard or mouse.
6. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat
Panel Monitor Console Kit (P/N 32P1032, 32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
7. Advanced TrackPoint IV features are not available on IBM xSeries systems.
8. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.
9. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY console switches.