IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам, Страница: 213 / 317

IB
M
xS
eri
e
s
440
169
For the latest product & technical information, refer to the Information Sources on pages 2 and 3. Updated 12/03/02
6. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI.
7. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. This system supports external connection only.
8. See Fibre Channel Solutions Overview section for additional configuration information.
9. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port provides one integrated short-wave optical port and two SCSI ports for tape storage connections (LVD, HVD and single-
ended).
10. xSeries 440 has an integrated Broadcom-based 10/100/1000 PCI Ethernet controller (copper). Wake on LAN is not supported for the integrated controller.
11. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions
provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. Two of the optional PCI Ethernet adapters listed are copper
and Intel-based (P/N 06P3601, 22P4901), one is 3Com-based (09N9901) and two are Broadcom-based (22P7801, 31P6301).
12. The Wake on LAN function of this option is not supported by this server.
13. xSeries 440 includes a Remote Supervisor Adapter (RSA) installed in a dedicated PCI slot with an external connector, leaving six PCI slots available for optional adapters. Support for
connection to other servers requires an optional Advanced System Management Interconnect Cable Kit (P/N 03K9309). Direct connection to the RXE drawer management controller in an
RXE-100 Remote Expansion Enclosure is supported through a standard Interconnect Management Cable Kit with 3.5m cable. An 8m optional cable is available. Sixteen-way configurations
provide an Ethernet crossover cable to connect the Ethernet ports in the RSAs in each chassis if they are not connected to an Ethernet LAN. All system management functionality supported
by the RSA is provided for both the primary and secondary servers through the Ethernet connection on the RSA. The RS485 port is only required when the 16-way x440 configuration is
interconnected to support additional systems with the x440 standard RSA serving as a focal point for those systems.
14. Required to connect the standard Remote Supervisor Adapter to an interconnect network with other servers for system management support through a single LAN or modem connection.
Up to 24 Integrated System Management Processors or Remote Supervisors Adapters may be interconnected with an aggregate connection length of no more than 91.4m (300ft). This
interconnect network of 24 devices may also include a maximum of 12 Advanced System Management Processors or Advanced System Management PCI Adapters. A customer-supplied
Cat5 cable is required for each interconnection. System management RS485 interconnect network connections for sixteen-way configurations are not required unless the RSA in the 16-way
x440 configuration is a focal point for additional systems.
15. RXE-100 Remote Expansion Enclosure supports up to 12 additional PCI-X slots. Cable required for connection included with expansion unit, which attaches to a standard integrated RIO
port located on the back of the x440 chassis. An optional longer cable is available. Refer to RXE-100 section for diagrams and supported options.
16. xSeries 440 supports only one RXE-100 for all server configurations. Two- and four-way systems use only RIO port A because port B is inactive unless a second SMP Expansion Module is
installed. Only one RIO connection to the RXE-100 is supported for both four- and eight-way systems. Sixteen-way systems require a connection from each server and an interconnection
between the servers.
17. Not supported when greater than 4GB of random access memory (RAM) is installed
16-way SMP Expansion, RXE Expansion and Interconnect Management cabling configuration
Slot 1: Bus A, 66MHz, 64-bit, full-length, 3.3v
Slot 2: Bus A, 66MHz, 64-bit, full-length, 3.3v
Slot 3: Bus B, 100MHz, 64-bit, full-length, 3.3v
Slot 4: Bus B, 100MHz, 64-bit, full-length, 3.3v
Slot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v
Slot 6: Bus D, 133MHz, 64-bit, full-length, 3.3v
Optimal order of installation (highest frequency
adapters first): 6-5-4-2-3-1
Scan sequence (up to eight-way):
Inside the server: slots 1, 2, 6, 5, 3, 4
Continuing in an RXE-100: slots 11, 12, 9, 10, 7,
8, 17, 18, 15, 16, 13, 14.
Scan sequence (16-way):
Inside the primary server: slots 1, 2, 3, 4, 5, 6
Standard 6-slot Expansion Kit in the RXE-100: slots 7, 8,
9, 10, 11, 12
Inside the secondary server: slots 13, 14, 15, 16, 17, 18
Second 6-slot Expansion Kit in the RXE-100: slots 19,
20, 21, 22, 23, 24
Location of PCI slots
and RIO ports on rear
of x440 chassis
1 2 3 4 5 6
B
A
RIO