IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам, Страница: 132 / 317

104
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
2
Max
Qty
2
-
89mm
(3.5in)
SL Yes FDD
Hot-swap Ultra160 SCSI HDDs
1
RM A
133mm
(5.25in)
HH Yes CD-ROM 06P5754
18.2GB 10Krpm Ultra160 SCSI
Hot-swap SL HDD
10000 SL 1 ... 12 12
RM B
133mm
(5.25in)
HH
1
Yes Open 06P5755
36.4GB 10Krpm Ultra160 SCSI
Hot-swap SL HDD
10000 SL 1 ... 12 12
RM C
133mm
(5.25in)
HH
1
Yes Open 06P5756
73.4GB 10Krpm Ultra160 SCSI
Hot-swap SL HDD
10000 SL 1 ... 12 12
(1 ... 12)
2
HS SL Yes Open 06P5767
18.2GB 15Krpm Ultra160 SCSI
Hot-swap SL HDD
15000 SL 1 ... 12 12
1. Two half-high (HH) bays can be combined to support a single full-high
(FH) device
2. Optional 6-pack Ultra320 Hot-swap Expansion Kit (P/N 32P8163) is
required to support bays seven through 12.
Note: Install HDDs in the same order as bays are numbered, i.e., bays one
to 12.
06P5768
36.4GB 15Krpm Ultra160 SCSI
Hot-swap SL HDD
15000 SL 1 ... 12 12
Associated Options
32P8163
6-pack Ultra320 Hot-swap
Expansion Kit
3
- - 6 ... 12 1
Optical Devices Bays
Supported
22P6976
40x-12x-40x Max Black CD-RW
Drive
4
A, B, C
External Storage
Expansion Units
5
Form Factor
35311RU EXP300 Storage Expansion Unit
6
Rack (3U)
09N7296
EXP300 Rack-to-Tower
Conversion Kit
-
35601RU
FAStT EXP500 Storage
Expansion Unit
7
Rack (3U)
35421RU FAStT200 Storage Server
8, 9
Rack (3U)
35422RU FAStT200 HA Storage Server
8
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. xSeries 255 contains an Ultra320 hot-swap backplane which supports Ultra160 HDDs at Ultra160 bus
speeds when connected to the standard integrated storage controller or Ultra320 speeds when connected to
an Ultra320 PCI controller (future). Installation of Ultra320 HDDs and an Ultra320 controller are required to
support Ultra320 bus speeds. If one or more Ultra160 HDDs are installed, the entire bus is limited to Ultra160
speeds.
2. Maximum quantity requires installation of 6-pack Ultra320 Hot-swap Expansion Kit (P/N 32P8163), which
supports bays seven through 12.
3. xSeries 6-pack Ultra320 Hot-swap Expansion Kit is used to provide an additional hot-swap backplane
supporting a single SCSI channel with up to six HDDs.
4. Either replace standard CD-ROM or install in one of the media bays. An IDE cable with three connectors is
included with the optional optical drive. If installing as an additional device, connect the cable to each optical
device and the IDE connector on the system board. Configure the optional device as a master using the preset
configuration if replacing the standard device or as a slave if installed as a redundant device.
5. Not supported by the onboard external SCSI port. To configure an external SCSI storage devices, select an
optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm that the
controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or
other expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer
to the Fibre Channel Solutions Overview section.
6. EXP300 includes a single 2m Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each
with its own power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit
(P/N 09N7296) is required.
7. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350w power supplies, each
with its own power cord.
8.The FAStT200 includes two hot-swap, 350w auto-ranging redundant power supplies, each with its own power
cord.
9. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
FDD
RM B
RM C
1 2 3 4 5 6
7 8 9 10 11 12
x255 front view
RM A:
CD-ROM