IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 200 / 317

158
xSeries 360 Power, Monitors & Accessories
Part Number Description
Power
1
31P6108 370W Hot-Swap Redundant Power Supply
2
Uninterruptible Power Supply (UPS)
3, 4
32P1020 APC 2U Smart-UPS 1400RMB
94G6676 APC Smart-UPS 3000RMB
5
37L6861 APC Smart-UPS 5000RMB
6
Monitors
7
633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), stealth black
8
63324HN E74 Color Monitor 17in (406mm, 16in viewable image), stealth black
8
66274AN G78 Color Monitor 17in (406.4mm, 16in viewable image), stealth black
8
32P1031 NetBAY 1U Flat Panel Monitor Console Kit (with US Space Saver Keyboard)
9
32P1032 NetBAY 1U Flat Panel Monitor Console Kit (without keyboard)
9
32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard)
9
32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard)
9
1. xSeries 360 models 2RX and 3RX include two 370W, hot-swap power supplies, each with two 9ft power cords--one high
voltage IEC 320-C13 to IEC 320-C14 and one low voltage IEC 320-C13 to NEMA 5-15P. N+1 power supply redundancy is
standard for these models. The addition of an optional 370W Hot-Swap Redundant Power Supply (P/N 31P6108) is
supported for configurations of greater than 370W with power redundancy, i.e., a total of three 370W power supplies.
Model 1RX includes one standard power supply and may be upgraded to two or three power supplies according to the
same rules for redundancy as models 2RX and 3RX.
The following table is provided as a reference. The table shows an example of a maximum configuration that can be
supported by two 370W power supplies with power redundancy.
R
S
A
s
lo
t 1
s
lo
t 2
s
lo
t
3
s
lo
t
4
sl
o
t
5
s
lo
t 6
rear view of chassis
RSA: standard Remote Supervisor Adapter
Slot 1: Bus 2, 100MHz, 64-bit, full-length, Active PCI-X, 3.3v (Bus 2 also supports one 133MHz adapter installed in slot 1.)
Slot 2: Bus 2, 100MHz, 64-bit, full-length, Active PCI-X, 3.3v (Slot 2 must be empty if a 133MHz adapter installed in slot 1.)
Slot 3: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v
Slot 4: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v
Slot 5: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v
Slot 6: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v
Scan sequence:
Inside the server: slots 3, 4, 5, 6, 1, 2
Continuing in an RXE-100: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16, 13, 14.