IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 75 / 317

IB
M
xS
er
ie
s
2
0
5
57
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
Updated 12/03/02
.
1. The xSeries 205 EIDE controllers support a maximum of four IDE devices per machine including CD-ROM drives, hard disk drives and IDE tape drives.
2. Nonhot-swap HDDs are supported in bays 4 ... 7 of nonhot-swap models and in bay four of hot-swap models. Nonhot-swap HDDs are not supported on the same SCSI bus as
the hot-swap backplane in hot-swap models.
3. Hot-swap HDDs are supported in bays 5 ... 7 of hot-swap models. Bay four supports nonhot-swap HDDs only. Nonhot-swap HDDs are not supported on the same SCSI bus as
the hot-swap backplane in hot-swap models.
4. Either replace the standard CD-ROM or install in the available media bay. An IDE cable with three connectors is included with the optional optical drive (same cable is standard
in the system). If installing as an additional device, connect the cable to each optical device and the IDE connector on the system board. Configure the optional device as a master
using the preset configuration if replacing the standard device or as a slave if installed as a redundant device.
5. Audio not supported for DVD-ROM drives. The drive provides data input/output only.
6. Not supported by the onboard SCSI controller. Select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports
the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
7. EXP300 includes a single 2m Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each with its own power cord. To convert an EXP300 to a tower form factor,
EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is required
Bay Form
Factor
Height Front
Access
Usage
1
133mm
(5.25in)
HH yes CD-ROM
2
133mm
(5.25in)
HH yes open
1
3
89mm
(3.5in)
SL yes FDD
4
89mm
(3.5in)
SL yes open
5 ... 7
2
89mm
(3.5in)
SL yes open
Note: HDDs are installed in the order of bays seven through four, i.e.,
7, 6, 5, 4.
1. Supports removable media devices only. Hard disk drives are not
supported.
2. Bays five, six and seven are configured as hot-swap bays on xAX
models. These bays are not front-accessible in nonhot-swap models.
xSeries 205 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
1
Slots
Supported
2
Storage Controllers
3
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller
4
Full 64-bit 1 ... 5
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller
5
Half 64-bit 1 ... 5
19K4646 PCI Wide Ultra160 SCSI Adapter
6
Half 32-bit 1 ... 5
Networking
7
Ethernet
8
09N9901 10/100 EtherLink Server Adapter by 3Com
9
Half 32-bit 1 ... 5
06P3601 10/100 Ethernet Server Adapter
9
Half 32-bit 1 ... 5
22P4901 10/100 Dual Port Server Adapter
9
Half 64-bit 1 ... 5
22P6801 PRO/1000XT Server Adapter by Intel (copper) w/CD, manuals
9
Half 64-bit 1 ... 5
31P6301 NetXtreme 1000 T Ethernet Adapter (copper)
9
Half 64-bit 1 ... 5
Token Ring
34L5001 16/4 Token-ring PCI Management Adapter
9
Half 32-bit 1 ... 5
34L5201 High-Speed 100/16/4 Token-Ring PCI Management Adapter
9
Half 32-bit 1 ... 5
System Management
09N7585 Remote Supervisor Adapter
10
Half 32-bit 1
Communications
11
1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz
slot.
2. The xSeries 205 has five full-length PCI expansion slots on a single 32-bit, 33MHz bus.
3. xSeries 205 has an integrated Ultra160 SCSI Controller with a single internal channel. Nonhot-swap models ship with a five-drop, multimode terminated
LVD SCSI cable. Hot-swap models ship with a nonterminated LVD SCSI cable.
4. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache
and two internal and two external Ultra160 connections (only two connectors may be used). External connections are 0.8mm VHDCI.
5. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache
and either one internal or one external Ultra160 connection. External connector is 0.8mm VHDCI.
6. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI
cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
Bay 1: CD-ROM
Front of chassis
Bay 2
Bay 4
Bay 6
Bay 7
Bay 5
Bay 3: FDD