IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам, Страница: 100 / 317

78
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner
or IBM Marketing Representative for assistance with your specific configuration requirements.
xSeries 225 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
Form Factor Termination
Included
Ext Tape
Enclosures
2
48P7042 20/40GB TR7 Internal IDE Tape Drive
1
2 -
89mm (3.5in) SL or
133mm (5.25in) HH
- -
00N7991 20/40GB DDS/4 4mm Internal Tape Drive 2 16 Ultra2 LVD
89mm (3.5in) HH or
133mm (5.25in) HH
Y
3
3510020
4
00N8015
110/220GB Super DLT Internal SCSI Tape
Drive
- 16 Ultra2 LVD 133mm (5.25in) FH Y
3
0034B0X
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y
3
0034B0X
24P2396 100/200GB LTO Half-High Tape Drive
7
2 16 Ultra2 LVD 133mm (5.25in) HH Y
3
3510020
4
24P2398
40/80GB Half-High DLTVS Internal SCSI
Tape Drive
2 16 Ultra2 LVD 133mm (5.25in) HH Y
3
3510020
4
Tape Autoloaders
360716X
3607 Series 1760GB/3.5TB SDLTpro Tape
Autoloader
- 16 Ultra2 LVD 2U Rack Y -
External Tape Enclosures
0034B0X NetBAY Tape Enclosure (Rack Mount)
5
- 16 Ultra2 LVD 4U Rack N -
3510020 External Half-High SCSI Storage Enclosure
6
- 16 LVD Desktop N -
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext Y 3510020
32P8164 External SCSI Interface Kit - 16 LVD Int N -
Note:
All models include an integrated Ultra320 SCSI controller. Nonhot-swap models include a four-drop multimode terminated LVD SCSI cable. Hot-swap models include a one-drop
nonterminated cable. To enable external attachment to channel B of the integrated SCSI controller, optional External SCSI Interface Kit (P/N 32P8164) is required, which
provides a 0.8mm VHDCI external connector. All SCSI tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646), which
includes a five-drop multimode terminated LVD SCSI cable and an external 0.8mm VHDCI connector. SCSI tape drives installed internally can be connected to channel A of the
integrated controller using the cable that ships with the tape drive if the HDDs or hot-swap backplane are attached to ServeRAID-4Lx. If ServeRAID-5i is installed, channel B
can be configured to support half-high SCSI tape drives installed in an external tape enclosure or installed in bay two.
1. All models include a two-drop IDE cable for attachment to the CD-ROM and an IDE tape drive.
2. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configurator section and the desired
enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.
3. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
5. This 4U rack-mounted enclosure supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external connectors for attachment of up to six
servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides termination for the SCSI bus. A
single 300w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage Units - Controllers
to select a supported cable.
6. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal connector is 68-pin high density supporting LVD. Requires 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). The enclosure now includes a backplate with a 0.8mm VHDCI external connection. External cables are not
included.
7. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
xSeries 225 Sample Configurations
Sales and Distribution Application Server (tower solution for 150 users)
Part Number Description Quantity
8647-22X xSeries 225 2GHz/400MHz-512KB Xeon, 256MB ECC, 36.4GB, 48x 1
59P5112 2GHz/400MHz-512KB L2 Cache Upgrade with Xeon Processor 1
33L5038 512MB DDR PC2100 ECC RDIMM 2
1
25P3492 ServeRAID-5i Controller 1
32P0723 36.4GB 10Krpm Ultra320 SCSI HDD 3
2
48P7042 20/40GB TR7 Internal IDE Tape Drive 1
32P8164 External SCSI Interface Kit 1
35311RU EXP300 Storage Expansion Unit 1
09N7296 EXP300 Rack-to-Tower Conversion Kit 1
06P5755 36.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 8
3
9512AB1 T541 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black 1
94G3136 APC Smart-UPS 1400 1
94G3134 APC Smart-UPS 700
4
1