IBM 6219 - IntelliStation M - Pro, Руководство по конфигурации и настройкам

Страница: 225 / 317

179
For the latest product & technical information, refer to the Information Sources on pages 2 and 3. Updated 12/03/02
IB
M
R
X
E
-100
RXE-100 Remote Expansion Enclosure Tape Options
Part
Number Tape Drives
Bays
Supported
1
SCSI
Interface
(bit)
Form
Factor
Termination
Included
Ext Tape
Enclosures
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
00N8015
110/220GB Super DLT Internal SCSI Tape
Drive
- 16 Ultra2 LVD
133mm
(5.25in) FH
Y
2
3551001
3
3503B1X
24P2396 100/200GB LTO Half-High Tape Drive
7
- 16 Ultra2 LVD
133mm
(5.25in) HH
Y
2
3551001
3
External Tape Libraries
4
3570C2x Magstar MP 3570 Tape Subsystem - HVD 6U Rack Y -
External Tape Enclosures
3551001 NetMEDIA Storage Expansion Unit EL
5
- 16 LVD Rack Y -
3503B1X Full-High SCSI Tape Enclosure
6
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
1. RXE-100 does not support internal tape drives. An external tape library or tape enclosure must be used. All tape drives and enclosures are supported by PCI Wide
Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8mm VHDCI connector. Select tape drive, enclosure and controller then use Appendix D: Cables - Storage
Units - Controllers to select an appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option. When installed in a NetMEDIA Storage Expansion Unit,
termination is also provided by the standard cables shipped with the enclosure.
3. LVD support for LVD tape drives installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) is provided by two four-drop internal LVD cables.
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, rack-mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 0.8mm VHDCI connectors and two internal four-drop LVD terminated 16-bit SCSI cables for device attachment. Two power
supplies and two power cords are also included. External storage cables are not included.
6. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a
rack (allow additional 1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external
cable. Supports the following full-high tape options: 00N8015, 00N8016.
7. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.