IAI IA-101-TT-USB, Руководство по эксплуатации

Страница: 68 / 392

1. Before
You Begin
60
1.6 Operation System Command Restriction
A system was added to check to the user if there is a stop switch to stop the actuator immediately at hand,
and if there is no stop switch, the actuator operation gets controlled from the XSEL PC software when
connected with a controller. (V13.00.00.00 or later)
After display of multiple program simultaneous startup permission and prohibition setting windows, the
confirmation window for safety circuit will be displayed.
Fig. 1.66 Confirmation Window for Safety Circuit
Select if there is a stop switch to stop the actuator immediately at hand prepared.
Only when “Yes” is selected in the safety circuit confirmation window (there is a stop switch), such operations
as actuator operation by the XSEL PC software and SEL program execution (operational system commands)
become available.
When “No” is selected in the safety circuit confirmation window (there is no stop switch), such operations as
actuator operation by the XSEL PC software and SEL program execution (operational system commands)
become unavailable.
(Note) When the operation system commands are to be executed, 9AC “Execution condition unsatisfied error
(PC)” is displayed.
The selected content will be shown in the main screen.
Fig. 1.67 Main window (Tool bar)
Display of status permitted / prohibited
operational system commands
(The enable/disable of the safety
circuit)