IAI IA-101-TT-USB, Руководство по эксплуатации

Страница: 288 / 392

13. How to Reset an
Absolute Encoder
280
10) Conduct absolute reset on [Axis 3 (Z)].
Click on “Start” button while the [Axis 3 (Z)] tab is selected, and a warning window shows up.
Release the emergency stop, check the content and click “Yes”. Home-return operation starts on the
Z-axis.
Absolute reset completes after home return.
Fig. 13.113
Caution:  Pay attention as the home-return operation starts as soon as clicking “Yes”. The
standard home position should be the posture below. Make sure to secure enough
area for home-return posture and not to have interference to peripheral
equipment.

In case there is any interference to peripheral equipment during the home-return
operation, the home-return operation completes at the position of interference,
and the proper home position cannot be acquired. In such cases, it may cause
malfunction of robot or peripheral equipment or critical operational error such as
crash or expected operation cannot be made.
Vertical Axis
Mechanical
Stopper
Position
Vertical
Axis Home
Position
J1 Axis Home
Position
130 deg
130 deg
J2 Axis Home
Position
J2 Axis
Mechanical
Stopper
Position
J1 Axis Mechanical
Stopper Position