IAI IA-101-TT-USB, Руководство по эксплуатации

Страница: 106 / 392

4. Program Edit W
indow
98
Fig. 4.2 Program Edit
*1 Only XSEL-RA/SA, RAX/SAX and RAXD/SAXD are available for setting with binary and hexadecimal
systems in Operand1 and Operand2.
Fig.4.3 Setting with Binary and Hexadecimal Systems
[How to set up]
When using the binary numbers, apply “&B” at the top of the value.
When using the hexadecimal numbers, apply “&H” at the top of the value.
Eight digits can be input at maximum for binary and hexadecimal numbers.
* In the operand to input the axis pattern (the operand input values in binary system), do not apply “&B” at
the top to input with the binary numbers.
* Binary numbers are treated as an integer with no signal.
(e.g. &B11111111 = 255)
* Hexadecimal numbers treated as an integer with a symbol.
(e.g. &HFFFFFFFF = -1)
[Restrictions]
・
Binary and hexadecimal systems cannot be used for the operand indirect indication in the program.
・
There will be no change to the input range of each operant even if binary or hexadecimal system is used.
*2 Press Enter key in the condition that the cursor is placed on the comment in the final line, and 100 lines of
blank step data will be added.