IAI IA-101-TT-USB, Руководство по эксплуатации

Страница: 158 / 392

7. Copying/Moving/Clearing Position Data
150
7. Copying/Moving/Clearing Position Data
7.1 Copying/Moving Position Data
(1) Click Position (O) from the menu bar, and then select Copy/Move (C).
(2) The position data copy/move window (Copy/Move Position Data) will open.
Copying position data: In Source to Copy/Move, specify the Top No. and Last No. of the position range
you want to copy or move.
Then, click Copy.
The positions specified in Source to Copy/Move will be copied to the
positions specified in Destination to Copy/Move.
Moving position data: Click Move.
The positions specified in Source to Copy/Move will move to the
positions specified in Destination to Copy/Move.
Fig. 7.1 Position Data Copy/Move
* Clicking Cancel will cancel the selected operation.
(3) Writing to the flash ROM
When the copy or move is completed, the following confirmation dialog box with the message, “Write
Flash ROM?” will be displayed.
Fig. 7.2 Confirmation Fig. 7.3 Confirmation
(X-SEL-J/K, P/Q, TT, SSEL, ASEL, PSEL, (X-SEL-JX/KX, PX/QX)
TTA, MSEL-RCX/PGX)
In the case of the SSEL, ASEL, or
PSEL controller, the number of
remaining steps will be 1500 or less.