IAI IA-101-TT-USB, Руководство по эксплуатации

Страница: 187 / 392

9. Symbol Edit W
indow
179
This is not displayed for
XSEL-RA/SA, RAX/SAX,
RAXD/SAXD, SSEL,
ASEL and PSEL.
(3) Writing to the flash ROM
Once the symbol has been transferred to the controller, the following confirmation dialog box with the
message, “Write Flash ROM?” will be displayed.
Fig. 9.7 Confirmation Fig. 9.8 Confirmation
(X-SEL-J/K, P/Q, TT, SSEL, ASEL, (X-SEL-JX/KX, PX/QX)
PSEL,TTA, MSEL-PCX/PGX)
In case of SSEL, ASEL, PSEL, X-SEL-P/Q and PX/QX compatible with increased memory (with gateway
function), R/S, RX/SX, RXD/SXD, RA/SA, RAX/SAX and RAXD/SAXD the following screens will be
displayed.
(PC interface software version 7.2.0.0 or later)
Fig. 9.9 Confirmation Fig. 9.10 Confirmation
(X-SEL-P/Q, R/S, RX/SX, (X-SEL-PX/QX)
RXD/SXD, RA/SA, RAX/SAX,
RAXD/SAXD, SSEL, ASEL, PSEL)
Click and select a desired item (Symbols, etc.) to write to the flash ROM.
Click Yes → The memory data will be written to the flash ROM.
Click No → The memory data will not be written to the flash ROM.
If No is selected, the controller will clear all data in its memory after a reset (i.e., after the
controller power is reconnected or a software reset is executed), and then load the data
from the flash ROM. (The controller will operate in accordance with the transferred data
until a reset is executed.)
* The number of writing to the flash ROM is limited (approx. 100,000 times). If you do not write all the data,
select Write Selected Data Region and write to the flash ROM.