IAI ERC3, Инструкция по эксплуатации

Страница: 145 / 188

Chapter 3 Operation
3.7
About Gateway Parameter Setting
Tool
137
2) Setting Menu
Click on the “Setting” menu on the top left corner in the main window and the setting menu
list pops up.
• Specialty Parameter : Set the parameters related to the process in ERC3 Gateway.
[Refer to 3.7.3 1), 2) and 3) GW Parameter */GW Mode Select.]
• Port Config : Set the communication speed between the tool and PC and COM
port number.
• TimeSetting(T) : Set the clock retained in ERC3.
[Refer to 3.7.3 4) Time Setting.]
3) Monitor Menu
Click on the “Monitor” menu on the top left corner in the main window and the monitor menu
list pops up.
(Note) “Monitor” cannot be selected before reading a parameter.
• I/O data : Show the details of the host PLC and ERC3 data.
[Refer to 3.7.3 5) I/O Data]
• Diagnostic Information : Show the number of ERRT and ERRC occurrence, emergency stops
and scan time.
[Refer to 3.7.3 6) Diagnostic Information]
• AlarmList(L) : Read and show the alarm list retained in ERC3.
[Refer to 3.7.3 7) Alarm List]
ME0302-4A