Note
•
Be aware that flicker may occur due to fluorescent lighting when activating the Intelligent Auto function.
In such a case, set either of the following:
–
Move the slider of [Motion priority level(Shutter)] in the “-” direction.
–
Change [Light control mode] to “Indoor scene (50 Hz)” or “Indoor scene (60 Hz)”.
•
Be aware that the brightness of the whole image may change due to changes in a part of the object
when activating the “Intelligent auto” function. In this case, move the slider of “Face priority level” in
the “-” direction.
[BLC/ HLC]
Select from the following. Not available when “On” is selected for “Intelligent auto”.
Back light compensation (BLC):
Enables the backlight compensation feature.
High light compensation(HLC):
Enables the high light compensation feature. The high light compensation
feature limits the overexposure of subjects caused by bright light at night, such as from car headlights.
Off:
Stops the backlight compensation feature and the high light compensation feature.
•
Default:
Off
[BLC level]
Adjust the backlight compensation level.
If you move the slider in the “+” direction, the effect of backlight compensation will increase.
If you move the slider in the “-” direction, the effect of backlight compensation will decrease.
Click the [Reset] button to return to the default setting.
•
Default:
16
[HLC level]
Adjust the high light compensation level.
If you move the slider in the “+” direction, the effect of high light compensation will increase.
If you move the slider in the “-” direction, the effect of high light compensation will decrease.
Click the [Reset] button to return to the default setting.
•
Default:
16
[Mask area]
When a mask area is set, the selected area is masked and you can adjust the brightness.
Refer to “3.6.4.2 Set mask areas” for information on how to set the mask area.
Detailed setting
[Auto contrast adjust]
Select On/Off(Manual) to determine whether or not to activate the auto contrast adjust function.
On:
Activates the auto contrast adjust function.
Off:
Stops the auto contrast adjust function.
•
Default:
On
Note
•
When “On” is selected for “Intelligent auto”, this setting is not available.
[Contrast level]
Adjust the contrast level.
If you move the slider in the “+” direction, the contrast of the image will increase.
If you move the slider in the “-” direction, the contrast of the image will decrease.
Click the [Reset] button to reset to the default setting.
•
Default:
128
Operating Instructions
93
3 Detailed Settings
